Home > Ham Radio > Amateur, Ham Radio >

SO-239 Chassis Mount Female SO239 Solder UHF Connector, Nickel
SO-239 Chassis Mount Female Solder-Type UHF Connector for Ham Radio | WiredCo


 
Alternative Views:


: $1.49

Availability:: Usually Ships in 24 Hours
Product Code: SO-239CHASMFUHFCO
Qty:

  
Description
 
New and Imporoved! SO-239 Chassis Mount Female Solder-Type Nickel UHF Connector. A SO239 female UHF chassis connector with 4 holes for mounting. One of the best imported quality I've seen. Nickel-plated, Gold plated brass center pin with solder pot. Hi-Temp Delrin Phenolic. Solid construction. One year warranty by wiredco.com

ELECTRICAL SPECIFICATIONS:
* Voltage rating: up to AC 500V
* Withstanding peak voltage: AC 1,000V one minute
* Insulation resistance:1,000M min at DC 500V
* Contact resistance: 3m max at DC 1A * High Temperature insulator

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 5 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 SO239 chassis mount October 4, 2021
Reviewer: JLF from Mesa, AZ United States  
This order was great, everything as described. Extremely fast shipping.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 As requested May 31, 2021
Reviewer: Eddie Shurbutt from Eastaboga, AL United States  
The items arrived on time and as described.  You can't ask for better than that.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 products/shipping February 9, 2021
Reviewer: Wilbur Doolittle from ATHENS, MI United States  
To cold to make outside connections but orderingand shipping went well.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Typical 4 Hole Chassis Mount Jack at a great price January 25, 2021
Reviewer: Ronsy from Dutchess County, NY  
These are the typical chassis mount connectors but are of better quality than others around. You may run into some that have very bad thread machining, cheap insulator & lousy plating. This connector is described as having a Hi-Temp PVC insulator which I haven't used one yet. To play it safe always use a heat sink at the base of the terminal & insert an old PL-259 in it when soldering to further sink the heat away from the pin insulator area.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 January 11, 2021
Reviewer: George v Salet from BRISBANE, CA United States  


Was this review helpful to you?