Home > LED Flashlights & Lighting > LED Lighting, Low Voltage >

LED RGB Color IR Remote Control 44Key for Led Strip Light 12VDC 6A
LED RGB Color IR Remote Control 44Key for Led Strip Light 12VDC 6A


 
Alternative Views:


: $4.99

Product Code: LEDRGBREMOTO1
Qty:

Description
 
New 44 Key Wireless Infrared Controller for RGB LED strip lights. Typically this will control the LED RGB strips from about 25ft away. Just make sure you don't block the IR receiver (just like your TV for example.)

12V DC operation voltage. It is able to control led strip light color, brightness and several modes. Supports both the SMD 5050 RGB Strips and the SMD 3528 Strip Lights. Including modes of, Strobe, Flashing, Fade, Smooth, Solid Color and, many choices of mixed color combinations. Note: If it does not function after connecting everything please check the battery then, if that's not the issue, check that you have the polarity right going to the strips themselves. The little arrows are supposed to line up. You'll need at least a 12VDC @ 3 amp power supply to drive one 16ft strip. This controller will operate up to two strips connected end to end or hard-wired in a "Tee" (up to 33ft or so away!.) Also, can do 10 of our Aluminum RGB Fixtures wired end-to-end.

Share your knowledge of this product. Be the first to write a review »