Home > Adapters > Hard Disk HDD Adapters >

120VAC to 12VDC 3.0 Amps Power Supply for LED lights or Monitors
12 Volt DC at 3 amperes


 
Alternative Views:


: $7.49

Product Code: 12V35POWER1
Qty:

  
Description
 
Light emitting diodes (LEDs) are low-voltage light sources that require a constant DC voltage or current to operate optimally. Because they operate on a low-voltage DC power supply, they easily adapt to different power supplies, have longer standby power, and are safer. LEDs require a device that can convert incoming AC power to the proper DC voltage and regulate the current that flows through the LED during operation. Suitable for other applications that require 12VDC @ 3 amps.

This Switching Power Supply LED driver converts 120V 60 Hz AC power to the 12 Volt DC power required by the LEDs and protects them from line-voltage fluctuations. Ensure your LED lights do not exceed the maximum power output of the power supply. A good power supply for our RGB or solid color strips on a roll! UL Approved. (Similar in appearance to the photo)

  • Input 100-240V
  • 50-60Hz standard household current
  • Output is 12 Volts @ 3.0 Amps Great for other devices as well as our LED Strips on the roll!
  • DC Power Jack output, inside diameter - 2.5mm and outer diameter - 5.5mm. A pretty standard size.
  • You may cut-off the plug to hard-wire into your LED lighting string or get our detachable DC power plugs and jacks.
  • Cosmetic appearance of exterior may be slightly different than shown!

Share your knowledge of this product. Be the first to write a review »