Home > LED Lighting > LED Lighting, Low Voltage >

120VAC to 12VDC 3 Amps Power Supply 3A for LED Driver lights, Monitor
12 Volt DC at 3 amperes


 
Alternative Views:


: $5.99

Product Code: 12V35POWER1
Qty:

Description
 
Light emitting diodes (LEDs) are low-voltage light sources that require a constant DC voltage or current to operate optimally. Because they operate on a low-voltage DC power supply, they easily adapt to different power supplies, have longer standby power, and are safer. LEDs require a device that can convert incoming AC power to the proper DC voltage and regulate the current that flows through the LED during operation. Suitable for other applications that require 12VDC @ 3 amps. Designed originally for the cable industry.

This Switching Power Supply LED driver converts 120V 60 Hz AC power to the 12 Volt DC power required by the LEDs and protects them from line-voltage fluctuations. Ensure your LED lights do not exceed the maximum power output of the power supply. A good power supply for our RGB or solid color strips on a roll! UL Approved.
  • Input 100-240V
  • 50-60Hz standard household current
  • Actual output on Label is 12 Volts @ 2.93A. Great for devices at 3A as well as our 16ft LED Strips on the roll!
  • DC Power Jack output, inside diameter - 2.1mm and outer diameter - 5.5mm. A pretty standard size.
  • You may cut-off the plug to hard-wire into your LED lighting string or get our detachable DC power plugs and jacks that we sell.
  • Cosmetic appearance of exterior may be slightly different than shown!

Share your knowledge of this product. Be the first to write a review »