Home > LED Lighting > LED Lighting, Low Voltage >

12VDC 6 Amp IR Infrared PIR Motion Sensor Control Switch for LED
12VDC 6 Amp IR Infrared PIR Motion Sensor Control Switch for LED

Alternative Views:

: $6.89

Product Code: LEDINFRARED1


This is a great little unit. This 12 Volt motion detector can be hidden just about anywhere on the wall. Infrared technology based automatic motion sensor switch. Automatic turn ON then off up to 10 minutes later while detecting people coming in. Automatic locked in bright daylight to save energy. Easy to install inline or you may replace 12 VDC existing switch. A good solution for energy savings and convenience . The delay before it turns off may be adjusted.

Some common uses.... in your garage turning on the light when you drive in, in a closet, for the kitchen cabinet or pantry, put LEDs under your kick panel area to turn on lights at night in the bath, a gun safe, anywhere you don't want to drill holes for switches or be bothered with installing contacts for doors etc.


  • Automatically turns on your 12V/24V LED lights when a thermal difference is detected in 8 meters, ex. people or animals passing by.

  • Automatically turns off the lights after no motion is detected in 1-10 minutes (set by manual).

  • Induction range: 8 meters, 60° from center of sensor

  • Working voltage DC 12V / 24V, max load current 6A, output power 72W.

  • Ideal to use at kitchen, basement, corridor, garage, etc.


  • 1x PIR Motion Sensor LED Switch

  • Model: PIR-8

  • Input voltage: DC 12V - 24V

  • Output voltage: DC 12V - 24V

  • Max load current: 6A

  • Output power: 72W

  • Induction range: in 8 meters, 60° from center of sensor

  • Delay time: 1 - 10 minutes set by manual

    • Share your knowledge of this product. Be the first to write a review »