This is a great little unit. This 12 Volt motion detector can be hidden just about anywhere on the wall or under the edge of a cabinet. Infrared technology based automatic motion sensor switch. Automatic turn ON then off up to 10 minutes later while detecting people coming in. Automatic on in bright daylight too. Easy install inline or you may replace 12 VDC existing switch. A good solution for energy savings and convenience . The delay before it turns off may be adjusted.
Some common uses.... in your garage turning on the light when you drive in, in a closet, for the kitchen cabinet or pantry, put LEDs under your kick panel area to turn on lights at night in the bath, a gun safe, anywhere you don't want to drill holes for switches or be bothered with installing contacts for doors etc.
Features:
Automatically turns on your 12V/24V LED lights when a thermal difference is detected in 8 meters, ex. people or animals passing by.
Automatically turns off the lights after no motion is detected in 1-10 minutes (set by manual).
Induction range: 8 meters, 60° from center of sensor
Working voltage DC 12V / 24V, max load current 6A, output power 72W.
Ideal to use at kitchen, basement, corridor, garage, etc
Description:
1x PIR Motion Sensor LED Switch
Model: PIR-8
Input voltage: DC 12V - 24V
Output voltage: DC 12V - 24V
Max load current: 6A
Output power: 72W
Induction range: in 7 meters, 60° from center of sensor
Delay time: 1 - 10 minutes set by manual control
