USB Port to 9-pin Serial Device Cable for PC & Mac 1M

This active unit makes it possible to connect a 9-pin serial device such as an older serial legacy device to a modern USB port. With the internal active chip inside you can now carry your legacy devices forward!

This is an USB to RS232 (Male 9-pin) active adapter that has a 1 meter cable. You may connect a 9-pin serial device to a PC or a Macintosh with a USB interface port. This adapter is ideal for use with Mobile Phones, Modems, Digital Cameras, Machinery, ISDN terminal adapters, graphics tablets, PDA's, bar code scanners, label printers, ham radio packet, FTA units such as Pansat and Viewsat, GPS and other serial devices which require an RS-232 connection. Functions fine with Windows 98/SE/2000/XP not to mention Macintosh and VISTA! So easy to install, normally just Plug-n-Play without the need if the enclosed driver. .Warranty: as described by www.wiredco.com

Specifications:

* Converts a standard 9-pin serial device to USB port
*Complies with USB Specification v1.1 & USB CDC v1.1
*Backward Compatible with USB Spec 2.0
*Supports RS232 Serial Interface (standard 9-pin serial)
*USB full speed communication and Bus Powered
*Single Cable USB to Serial communications
*Detects USB suspend condition
*Supports Plug & Play specification
*Supports Automatic handshake mode
*Supports up to 1 Mbps data transfer rate
*Support Remote wake-up and power management
*Draws power directly from USB
*1 meter USB cable attached
*Win 98SE, ME, 2000, XP, VISTA & WIN7

Plus Macintosh OS 8.6 thru 10.xx supported ** Sorry, Does NOT work with Mac OS X Leopard